|
|
|
Download or view technical
documents for the listed products. Click on the product's image to view an
enlargement. For help downloading the pdf files, please click on the "PDF
help" icon. |
|
|
Page 1
|
Page 2
|
Page 3
|
Page 4
|
Page 5
|
|
|
| Applications: |
Ideal meter for viscous fluids such as oils, waxes, polymers etc.
Reed switch output pulse for use with plc's, counters, displays, etc
|
| Flow Range: |
10 l/h to 60 m3/h (Water) |
| Accuracy: |
±0.8% |
| Connection: |
DN10 to DN 100 DIN Flanges |
| Materials: |
SS-316L, PVC, PP, PTFE |
| Temperature: |
-20ºC to +130º |
| Pressure: |
10 to 150 bar |
| Viscosity: |
0.3 to 150 000 mPa.s |
| Electronics: |
MC-01,
MT-02,
DFD,
CI-420
|
 Covol.pdf (285 kB)
|
|
|
|
| Applications: |
High accuracy meter for clean fluids such as demin water and other low
conductivity fluids. Inductive pulse output for ue with plc's, counters, displays, etc.
|
| Flow Range: |
100 l/h to 8 000 m³/h (Water)
3 000 Nl/h to 300 000 Nl/h (air) |
| Accuracy: |
±0.5% |
| Connection: |
DN15 to DN 500 DIN Flanges |
| Materials: |
SS-316L and SS-420 |
| Temperature: |
-20ºC to +130º |
| Pressure: |
16 to 400 bar |
| Electronics: |
MC-01,
MT-02,
DFD,
CI-420
|
TM-44_Manual.pdf (237 kB)
|
|
|
|
| Applications: |
The TM-44H series flow meters have been designed specifically for high accuracy flow
measurement and batch control in the liquid food industries.
|
| Flow Range: |
2 l/min (120 l/h) to 1 200 l/min (72 m³/h) |
| Accuracy: |
±0.5% |
| Connection: |
½" to 3" Tri-clamp or 1" to 3" RJT or ISS threaded |
| Materials: |
SS-302, SS-316 and SS-431 |
| Max. Temperature: |
+150º |
| Pressure: |
Limited only by coupling design |
| Electronics: |
MC-01,
MT-02,
DFD,
CI-420
|
TM44H.pdf (248 kB)
|
|
|
|
| Applications: |
The pulse counter CIP is designed to work with Tecfluid’s volumetric
counters (Covol) and turbines. The circuit is based on a
microprocessor that, in function of the pulses per litre programmed,
totalizes the volume that flows through the meter and shows this value
on a local indicator. This instrument is battery powered and doesn’t
require any wiring. This makes its installation very easy.
|
| Inputs: |
TM-44 turbines, COVOL |
| Reset: |
Push button or magnet |
| Display: |
7 digit x 8mm high LCD display |
| Power: |
Battery |
CIP user Manual: CIP_Instructions.pdf (168 kB)
|
|
|
|
| Applications: |
The MC-01 series are panel mounting micro-processor based
control instruments for flow rate and batching control. They
are fully user programable and will adapt directly to any TM-
44 turbine, COVOL output, or equivalent pulse generating or
analog output transducers.
|
| Inputs: |
TM-44 turbines, COVOL, etc |
| Outputs: |
Batching relay, 0...4-20mA, 0...2-10V |
| Display: |
16 caracter x 2 line LCD alphanumeric display |
| Power: |
220V ac 50/60Hz Standard
Also: 24, 110, 240 Vac and 24 Vdc |
MC-01.pdf (74 kB)
|
|
|
|
| Applications: |
The MT-02 series are panel mounting micro-processor based
control instruments for flow rate and batching control. They
are fully user programable and will adapt directly to any TM-
44 turbine, COVOL output, or equivalent pulse generating or
analog output transducers.
|
| Inputs: |
TM-44 turbines, COVOL, etc |
| Outputs: |
Batching relay (1 or 2) |
| Display: |
Bright LED display, 7 digit data, 1 digit mode |
| Power: |
220V ac 50/60Hz Standard
Also: 24, 110, 240 Vac and 24 Vdc |
MT-02.pdf (62 kB)
|
|
|
|
| Applications: |
The DFD series are rail mounting micro-processor based
control instruments for frequency division. They are fully user
programable and will adapt directly to any TM-44 turbine,
COVOL output, or equivalent pulse generating output
transducers.
- Automated process control in any industry with batching or
volume control for interfacing with PLC.
- Interface with slow scanning PLC inputs.
- Interface with PLC without calculation capacity.
- Interface with simple counters.
- Interface for electromechanical totalizing counters.
|
| Inputs: |
TM-44 turbines, COVOL, etc |
| Outputs: |
Opto isolated |
| Power: |
220V ac 50/60Hz Standard
Also: 24, 110, 240 Vac and 24 Vdc |
DFD.pdf (79 kB)
|
|
|
|
| Applications: |
The CI-420 series are rail mounting micro-processor based
control instruments for frequency to analog conversion. They
are fully user programable and will adapt directly to any TM-
44 turbine, COVOL output, or equivalent pulse generating
output transducers.
- Automated process control in any industry with batching or
volume control for interfacing with PLC.
- Interface with PLC inputs.
- Interface with analog inputs or alarms.
|
| Inputs: |
TM-44 turbines, COVOL, etc |
| Outputs: |
0...4-20mA, 0...2-10V |
| Power: |
220V ac 50/60Hz Standard
Also: 24, 110, 240 Vac and 24 Vdc |
CI-420.pdf (81 kB)
|
|
TOP
|
Page 1
|
Page 2
|
Page 3
|
Page 4
|
Page 5
|
|
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")
; "Hart")
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")
; "Click to see a larger image")